USER MANUAL
14/06/2022
912S-00678 v01.20
7
3.
INSTALLATION
The S100 is supplied with a quick release mounting bracket. This bracket should be
mounted on a suitable wall or bulkhead in a position where it can easily be retrieved in an
emergency.
Although the S100 is rugged and waterproof, Ocean Signal recommends mounting the
SART in a protected position whenever possible.
!
Do not mount the SART closer than 1 meter to any steering compass as this
may affect the accuracy of the compass.
!
Keep the S100 away from any strong magnetic sources such as loudspeak-
ers, compass compensation magnets, etc.
Mark the location of the four screw holes onto the mounting position. Pre-drill the holes if
required then screw the mounting bracket to the surface using the four No6 x 5/8” screws
supplied.
The SART simply clips onto the mounting bracket.
