USER MANUAL
14/06/2022
912S-00678 v01.20
13
6.
APPENDIX
6.1 Maintenance and Troubleshooting
The S100 SART should not need servicing during its lifetime, with the exception of changing
the battery before the marked expiry date.
Regular cleaning, inspection and testing are advised - clean any grime or salt residue off
the unit with a weak solution of detergent in warm water. Never use solvents as this may
affect the structural integrity of the plastics used. Rinse well with fresh water after clean-
ing.
Inspect the unit for signs of case damage or cracks, check the labels are intact and the
battery is within the expiry date. Make sure the telescopic pole (if provided) is still present
and is free to extend.
Check for correct SART operation using the Test Mode (see section 4.4). If the unit appears
to fail testing, check the following points before contacting a service representative:
!
Are there any vessels in the vicinity that would have an active radar system
to trigger the SART?
!
Is the SART being shielded from being radar visible to other vessels?
6.2 Accessories
Replacement Lithium Battery for S100
LB3S
Ocean Signal Part Number
711S-00609
