ATA100 INSTALLATION MANUAL
44
912S-03333-01.05
21/04/2020
RMC
Recommended minimum specifi c
position data
Sent every second from the
internal GPS Receiver
SSD
AIS ship static data
In Response to an AIQ request
TRL
AIS transmitter-non-functioning log
In Response to an AIQ request
TXT
Text transmission
In Response to an AIQ request
VDM
AIS VHF data-link message (Incoming)
On receipt of and AIS VDL
message on Channel A or B
VDO
AIS VHF data-link message (Outgoing)
On transmission of a own ship
VDL message on Channel A or B
VER
Version
In Response to an AIQ request
VSD
AIS voyage static data
In Response to an AIQ request
VTG
Course over ground and ground speed
Sent every second from the
internal GPS Receiver
In addition to these, the following sentence received on the Sensor ports will be echoed
over the Pilot port and the ECDIS port.
Signature
Description
HDG
Heading, deviation and variation
HDT
Heading true
THS
True Heading and Status
ROT
Rate of Turn
5.6 Sentence output fi ltering
Each of the ports has a fi lter that can be confi gured to determine which signatures are
outputted though that port. By default they will be set up as follows:
Port Name
Baud
Signatures
DGPS
38400 RMC, GBS, GGA, GSA, GSV, VTG (All from Internal GNSS)
LR
38400 LRF, LR1, LR2, LR3
ECDIS
38400 RMC, GBS, GGA, GSA, GSV, VTG (All from Internal
GNSS) HDG,HDT,THS,ROT (echoed from sensor ports - Unfi ltered)
ABK, ACA, ACS, ALC, ALF, ALR, ARC, EPV, HBT, RMC, SSD, TRL,
TXT, VDM, VDO, NAK (Unfi ltered)
PILOT PORT 38400 RMC, GBS, GGA, GSA, GSV, VTG (All from Internal GNSS)
HDG, HDT, THS, ROT (echoed from sensor ports - Unfi ltered)
ABK, ACA, ACS, ALC, ALF, ALR, ARC, EPV, HBT, RMC, SSD, TRL,
TXT, VDM, VDO, NAK (Unfi ltered)
Summary of Contents for ATA100
