Ocean Signal ATA100, Installation Manual

Page: 23 / 52

21/04/2020 912S-03333-01.05 23
ATA100 INSTALLATION MANUAL
2. Menu Key
Pressing the menu key will access the ATA100 menu system. The menu screen that
appears will depend on the screen in use when the menu key is pressed. The menu key can
also be used to close the menu system.
3. Pilot Plug
The pilot plug allows pilots and other mariners to connect a laptop PC or other portable
device directly into the ATA100 giving access to the AIS information of the vessel including
necessary dynamic and static vessel information.
4. Enter Key
The enter key on the ATA100 allows the user to select a highlighted fi eld and either see
information or enter information as necessary. This entering process can also be achieved
by depressing the jog stick on the front panel.
5. Indicator LED
Green - Power on (blinks off each transmit)
Amber - Silent Mode
Red - Transmit fail
6. Jog Stick
The jog stick allows the user to navigate through the different screens and menus of the
ATA100 using directionality of up, down, left and right and also by rotating clockwise and
anticlockwise. The jog stick can also be depressed as an alternative to using the enter key.
7. Display Brightness Key
Pressing the display brightness key on the front panel will access a brightness level
indicator. Rotate the jog stick to increase or decrease the light level.
8. Voyage Data Input Key
Pressing the voyage data input key allows quick access to update variable voyage
information such as navigational status and estimated time of arrival.
9. Page Key
Pressing the Page key will allow the user to alternate between three target view screens.
These are Map Screen, Target List Screen and Target Radar Screen. Pressing the page key
will close all open menus and windows (except for Alarm pop-up windows) and revert back
to the last active target view screen.