Aquarist rel. 1.0
8
1. Serial Number
2.
Separate ON/OFF power switch on the back of the unit
3.
VOLTAGE switch - unit that CAN OPERATE BOTH 120V/240V -
Make sure you
have selected the correct power source voltage on the back of the unit, before
powering on!
4.
ON LED
5.
Half /Full Duplex switch (Half Duplex only for diver - see pag.10)
6.
Microphone / mixer / PA system in
7.
Diver audio out port to mixer
8. Port for diver audio in (uw unit 6 pin cable to surface DIN connector - Diver cable
(up to 200 metres and underwater unit 2.0 sold separatly (see page...)
4.1
SURFACE UNIT
8
6
7
1
4
3
2
5
VOLTAGE switch!
Power / switch
ON LED
Diver IN
Half/Full Duplex
switch
Diver audio out to
Mixer
Microphone / mixer /
PA system in
Serial number
