Ocean Protect
| OceanGuard Installation Guide
Page 2 of 5
Configurations
The OceanGuard can fit a range of pits typically found in Australia including, kerb entry, rear entry with grated
drain entry as well as field gully pits.
There are multiple sizes to suit pits ranging in plan dimensions of 450 x 450mm – 1200 x 1200mm. Additional
custom sizes are available to suit circular and non-standard pits.
The standard OceanGuard installation treats surface flow only, see figure 2.
In some instances, it may be necessary to perform an installation that treats pipe flow, see figure 3.
Figure 2: Standard configuration – surface flow
Figure 3: Example configuration – pipe flow
Another typical configuration required, is where the runoff collected by grated strip or trench drains needs
to be treated, see figure 4.
Figure 4: Example configuration – strip/trench drain
