Ocean Protect OceanGuard, Installation Manual

Page: 2 / 6

Ocean Protect | OceanGuard Installation Guide
Page 1 of 5
Rev: 1 Last Updated: March 2019
Introduction
The purpose of this manual is to indicate the safest and most efficient method in installing the Ocean
Protect OceanGuard.
Equipment
The following personal protective equipment is required by staff for installation activities:

Puncture resistant gloves

Steel capped safety boots,

Long sleeve clothing, overalls or similar skin protection

Eye protection

Hearing protection

High visibility clothing or vest
Note: The above list is a guide only, all individuals performing installation should evaluate their own OH&S
requirements as required by law or site specific safety requirements.
Typical tools required for installation include the following

Tape measure

Marking Template

Marking spray paint

8mm masonry drill

5 mm steel drill

Pop Riveter for 4.8mm rivets

Hammer

Stanley knife

Straight edge

10mm socket and ratchet

Hacksaw
Components
Figure 1: OceanGuard components