DRAFT
© Ocean Guardian 2019
30
BOAT01 / FISH01 Manual v1.3
11 Safe Storage and Regular Maintenance
Regular Maintenance
1. Ocean Guardian devices perform a self-check each time they
are turned on. To confirm the device functions effectively you
can also:
a. Place your hand close to the antenna/electrodes to feel
the electric field pulsing when the device is submerged
under salt water.
b. Purchase an Ocean Guardian Tester to verify whether the
Ocean Guardian is producing an electric field.
2. Thoroughly rinse the Ocean Guardian in fresh water after each
use.
3. Allow the Ocean Guardian to dry before placing it in storage.
Avoid direct sunlight when drying the unit. Store it in a cool, dry
place away from sunlight, preferably in the case shipped with
the unit.
4. The device should be kept free of dirt and sand at all times.
Warnings:
·
Thoroughly dry the Ocean Guardian before connecting the
charger. Be especially vigilant when charging the Ocean
Guardian immediately after it has been used in water.
·
Under no circumstances should you attempt to repair the
Ocean Guardian as this will void any warranty.
Power Module Storage
We recommend storing the Power Module with approximately 50%
charge remaining. If the battery is completely discharged after use,
only charge it for approximately half the recommended charge
time, e.g. 3.5 hours. View the section in this manual titled
Operational LED Status Indications
for more details on battery
charge status indications.
Summary of Contents for BOAT01
Page 1: ......