![background image](http://html1.mh-extra.com/html/ocean-guardian/boat01/boat01_user-manual_3217643027.webp)
DRAFT
© Ocean Guardian 2019
27
BOAT01 / FISH01 Manual v1.3
9 Charging the Power Module
CAUTION:
·
Electrical power must be off before connecting or
separating any connectors on the
POWER MODULE
·
When charging and not in use the
POWER MODULE
requires 7.2Watt max.
·
If charging and operational in water the
POWER MODULE
requires 9.4 Watt max.
·
For 12VDC power supplies the current is 0.6A and 0.78A
therefore it is best to use a 1A adapter with 80% derating.
·
For 24VDC please use a 0.5A adapter.
·
When joining two sub-sea connectors DO NOT force the
male pins into the female connector or pins may be
damaged. Engage the connectors with firm and smooth
connection without forcing them together, using the 'lead in'
guide pin to ensure the connectors join correctly.
·
We recommend storing the
POWER MODULE
with
approximately 50% charge remaining. If the battery is
completely discharged after use, only charge it for
approximately half the recommended charge time, e.g. 3.5
hours. View the section in this manual titled
for more details on battery charge
status indications.
To charge the
POWER MODULE
.
1. Remove the
DUMMY CONNECTOR
from the
POWER
MODULE
if it is attached.
2. Attach the male connector on the Ocean Guardian 6 metre
CHARGING CABLE
to the female
POWER CONNECTOR
on
the
POWER MODULE
.
Summary of Contents for BOAT01
Page 1: ......