KTA-296 Wireless I/O Extender
11 Feb 2022
www.oceancontrols.com.au
4 of 7
to ensure the radio is properly plugged into the socket.
•
Flashing quickly
(ten times a second). Unknown error;
the radio has been found, but an error occurred when
initialising.
COMMS
Shows the status of the communications between the two
radios:
•
Solidly On
. Both devices are communicating
successfully
•
Flashing slowly
(once a second). Communications
timed out. The link is down or out of range.
•
Flashing quickly
(ten times a second). Bad or
unknown packet. A message was received, but it is not
in a format that is recognised or can be decoded.
TRANS
Transmit. Flashes every time a message is transmitted over
the radio link
RECEIVE
Flashes every time a message is received on the radio link
DIP switches:
(The enclosure will need to be removed to access)
Switch 1
Modbus Addressing
Switch 1
Modbus Addressing
OFF
Master = 1; Slave = 2
ON
Master = 2; Slave = 1
Switches 2 & 3
Poll time
Switch 2
Switch 3
Poll Time
OFF
OFF
5 s
ON
OFF
10 s
OFF
ON
15 s
ON
ON
20 s
Switch 4
Activate Config Mode
