background image

Step 3: Replace the battery cover, making sure 

the battery cover groove is aligned with the 

“unlock” sign. Insert a coin vertically in the 

groove and press it gently, then rotate 45º 

counter-clockwise, making the groove aligned 

with the “lock” sign as shown on the right.

WARNING

1. Battery must be disposed of properly. Do not 

    short circuit or dispose of in a fire.

2. Keep batteries out of the reach of children.

3. Caution for ingestion.

4. Non-rechargeable batteries are not to be 

    recharged.

5. Exhausted batteries are to be removed from 

    the product.

- Buttons design is based on a typical model and might 

  be slightly different from the actual one you purchased, 

  the actual shape shall prevail.

- When there are significant differences between features 

  or operation implied by the remote control illustration and 

  the actual functions described in the USER’S MANUAL, 

  the descriptions in the USER’S MANUAL shall prevail.

NOTE: If the unit has ENERGY

SAVER function, it will initiate

automatically the Energy Saver

function under Cool, Dry, and

Auto (only Auto-Cooling and

Auto-Fan) modes.

Press this button to 

activate the Sleep 

mode. This function 

is available on COOL 

or AUTO mode only 

and will maintain the 

most comfortable 

temperature for you 

while saving energy.

The operation starts and 

stops when this button is 

pressed.

Press this button to

activate the Energy

saving mode. Press

it again to stop the

function. 

Push this button to

increase the 

temperature setting in 

1°C/1°F increments 

up to 30°C/86°F

Used to select the fan

speed in four steps:

Auto, Low, Med, and

High.

Press this button to

select the desired

operation mode from

AUTO, COOL, DRY,

and FAN.

Push this button, the

system will automatically

shift to COOL operation

with auto fan speed, the

setting temperature is

26°C/80°F. And the timer

setting program will be

cancelled.

Push this button to

activate the "Auto

Start" or "Auto Stop"

program.

Push this button to

decrease the

temperature setting in

1°C/1°F increments

down to 17°C/62°F.

SPEED button

Summary of Contents for OBZ-06CR3







Reviews: