Ocean Aire 2OACH SERIES, Engineering, Installation And Service Manual

Page: 13 / 36

Ceiling
Kit
Model
Flexible Duct
Diameter X
Length
Fits
2OACH
12
Fits
2OACH
18
Fits
2OACH
24
Fits
2OACH
36
Fits
2OACH
60
CK - 12 12 inch X 8 feet ✓ ✓ ✓ No No
CK - 16 16 Inch X 8 feet
No
No No ✓ ✓
25
(.20)
50
(.25)
50
(.25)
50
(.25)
100
(.50)
Maximum Equivalent
Feet (approx)
(ESP)
2 x 2 CEILING
DUCT - PANEL
VINYL COATED
FABRIC DUCT
DUCT FLANGE
DUCT STRAP
11
ACCESSORIES
CEILING PANEL DUCT KIT
A ceiling panel kit is available for discharging the
condenser air above a drop ceiling. The ceiling
panel duct kits are furnished with a white vinyl
coated flexible duct that allows for convenient
installation. A 2ft X 2ft ceiling duct - panel is
included to replace a 2ft X 2ft drop - ceiling panel
where the connection is desired.
The
CK - 12
is available for 2OACH12, 18, and 24.
The ceiling panel kit consists of 8 feet of flexible
duct, a 2' X 2' lay in ceiling panel and a 12 inch
duct flange that attaches to the condenser air
discharge opening on the top of the unit. The
CK - 16
(for 3 and 5 - ton units) consists of a ceiling
duct - panel, and a 16 inch flexible duct.
Note
—Drop ceiling spaces should be vented
or large enough to handle the warm condenser
air. Check local codes to insure compliance .
If longer runs of duct are required, table below lists
maximum duct run with no bends. For every 90°
elbow, subtract 6 feet from the run.
DUCT FLANGE
The optional duct flange allows for round flexible ducting to
be attached to the 2OACH condenser discharge.
DF - 12
(12 - inch diameter) fits all units except the 3 ton/5
ton. The
DF - 16
(16 inch diameter) fits the 3 ton model
2OACH36, and 5 ton Model 2OACH60.
NOTE: 2OACH36 and 2OACH60 units come with
duct flanges installed .