Lock the OPC unit (right)
Procedure
1.
Rotate the metal OPC pulley until the end of the back side of the OPC belt runs near (+/- 0.1 inch)
the arrows of the yellow registration board.
[87] Reposition the OPC belt
2.
Use the red handle to push the OPC unit inwards as far as possible.
[88] Move the OPC unit in
3.
Use the service key to turn K5 clockwise into the locked position.
4.
Use the service key to turn K4 counter-clockwise into the locked position.
5.
Use the service key to turn K3 counter-clockwise into the locked position.
6.
Use the service key to turn K2 counter-clockwise into the locked position.
7.
Use the service key to turn K1 counter-clockwise into the locked position.
K1
K2
K3
K4
K5
[89] Lock the OPC unit
Lock the OPC unit (right)
Chapter 3 - Maintenance tasks - Level 2
71
Océ VarioPrint 6000 line
Summary of Contents for VarioPrint 6180 Titan
