Oce VarioPrint 6000 Ultra Line, User Manual

Page: 28 / 88

Lock the clean unit (left)
Introduction
This procedure is only intended for key operators who received the special maintenance
training.
When to do
After you replaced the cleaners ‘Replace the cleaners’ on page 14 , you must restart the
machine. If you accidentally forgot to lock a clean unit after you replaced the cleaners,
the machine will detect this during the initialization. Then the operator panel will display
this maintenance task.
Required tool
■
Service key (supplied with the machine)
■
Socket wrench 10 (supplied with the machine)
Lock the clean unit
1.
Use socket wrench 10 to loosen the bolt of the front doors (1).
2.
Open the front doors (2).
1
2
[33] Open the front doors
Chapter 2 - Maintenance tasks - Level 1 28
Lock the clean unit (left)