Oce VarioPrint 6000 MICR series, User Manual Operating Information

Page: 33 / 264

The output locations
Introduction
The machine supports several output locations for the printed jobs. The default configu-
ration of your machine contains a stacker and the system output. The finisher and the
stacker/stapler are optional output locations. Furthermore, you can connect several op-
tional external finishers to the machine.
Note:
You need the optional finisher, the optional stacker/stapler or another optional external
finisher to staple the jobs.
Illustration
3
1
2
4
6
5
[13] The output locations
Overview of the output locations
Description of the output locations
#
Description Component
The stacker is the default output location of the machine. The
stacker capacity is 6,000 sheets, in 2 stacks of 3,000 sheets each
(80 g/m² or 20 lb. bond).
The stacker does not contain staple cartridges. Therefore, the
stacker cannot be the output location for jobs that require sta-
ples. 'Stacker' 1
Chapter 4 - Overview of the system components 33
The output locations