Oce VarioPrint 6000 MICR series, User Manual

Page: 7 / 32

Power Cord
Warning
• Do not scratch, abrade, heat, twist, bend, place a heavy object on or cause any other
damage to the power cord. The use of a damaged power cord (exposed core wire,
broken wire, for example) could result in a fire or breakdown. If you discover any of
these conditions, turn OFF the power switch immediately and unplug the power cord
from the power outlet. Then call your authorized service representative.
• Do not use an extension cord to connect to the machine.
• Only use the mains connector cable that was supplied with the machine.
Power Supply
Warning
• Insert the power plug directly into a wall socket that has the same configuration as
the plug. The use of adapter leads can result in an inadequate power supply. If a suitable
wall outlet is not available, ask a qualified electrician to carry out the installation.
• Do not connect the machine to mains voltage that differs from the value stated on
the power marking label.
• Do not use a multiple outlet adapter or an extension lead. Contact your authorized
service representative if an extension lead is required.
Caution
• Consult your authorized service representative before you connect other equipment
to the same wall outlet.
Note
• If connection to a different mains voltage is required, contact your authorized service
representative.
• The input interface module is accessible at the front of the machine. This module
contains a power outlet that is intended for service purposes only. Do not connect
any electrical device to this power outlet.
Power plug
• For machines that are connected via a wall socket: Place the machine close to a wall
socket that is easily accessible. The power plug is intended to serve as a disconnect
device.
Grounding
Warning
• Connect the power cord to an electrical outlet (wall socket) that is equipped with a
grounding terminal.
• This equipment was not designed for connection to an IT power system. (An IT
power system is a voltage network in which the neutral wire is not grounded).
Chapter 1 - Safety information 7
Instructions for safe use