Oce VarioPrint 6000 MICR series, User Manual

Page: 18 / 32

Caution labels and notations
Introduction
You can find the power-marking label near the mains entrance. If connection to a different
mains voltage is required, contact Customer Service.
Warning:
Do not remove caution labels or caution notations. If a label or notation is soiled, please
clean the label or notation. If you cannot make the label or notation legible, or if the label
or notation is damaged, please contact your service representative.
Space requirements and operation precautions (All countries)
• The required operating space of this product will be communicated to each customer
by the local sales representative during the Site Survey.
• Please refer to the corresponding Safety Data Sheets for the specific safety information,
including the dimensions of the product, the recommended room volume and venti-
lation rate. You can download the Safety Data Sheets from the support site of your
product at http://global.oce.com/support/
Operating environment
The figure below shows the typical, the guaranteed and the reasonable environmental
conditions in which your machine can operate. The bold line marks the area in which
the machine performs at a guaranteed quality level. The thin line marks the area in which
the machine performs at a reasonable quality level without any permanent degradation
of the machine. The pink square indicates the optimal operating conditions: 22 °C and
50% relative humidity.
You can find the translations of the English terms in the table below the figure.
Chapter 3 - General information 18
Caution labels and notations