Switch the Océ TDS450 on/off
Switch the Océ TCS4 scanner on
1. Set the On/Off switch at the right to position ‘1’.
Switch the Océ TCS4 scanner off
1. Set the On/Off switch at the right to position ‘0’.
Start up the Océ Power Logic Controller
1. Switch on the controller and the screen.
After the initial system test of the controller the applications, Océ
Queue Manager, Océ System Control Panel, Océ Settings Editor and
Océ Scan Manager are automatically started and the controller
applications are ready for operation.
Switch off the Océ Power Logic Controller
1. Open the Océ System Control Panel application.
2. Click ‘System’ to open the system menu.
3. Click ‘Shutdown’.
A dialogue box displays.
4. Click ‘Yes’ to confirm.
The system automatically performs the shutdown procedure for the
controller.
Note: Wait at least 5 seconds before you restart the Océ TDS450.
13
Summary of Contents for TDS450
