5
USING THE ADMINISTRATOR SETTINGS
Additional information on using the keys to configure administrator settings
A When a key that appears in the form
is touched, the setting screen of that key will appear.
B When a checkbox (
) appears in front of a setting, a checkmark ( ) will appear when the checkbox is touched.
This indicates that the setting is enabled. If a checkbox with a checkmark ( ) is touched, the checkmark is
cleared (
) and the setting is disabled.
C If the settings continue on the following screen(s), touch the
and
keys to move back and forth through the
screens. To return to the category selection screen, touch the [OK] key.
D The currently set numerical value is displayed.
E Numerical values can be set by touching the
and
keys.
20
(1 999)
OK
DISABLING OF DOCUMENT
FEEDER
DISABLING OF PUNCH
DISABLING OF LARGE
CAPACITY CASSETTE
DISABLING OF DUPLEX
DISABLING OF STAPLER
ORIGINAL SIZE DETECTOR SETTING
DEVICE CONTROL
SYSTEM SETTINGS
1/2
A
B
C
D
E
These keys and indicator are available
on setting screens that require the entry
of numerical values.
XXX
JupiterII_Admin_sec.book 5 ページ ２００７年７月３日 火曜日 午後２時２分
