Copy or scan originals using the glass plate
Introduction
Use the glass plate to copy or scan bound originals (such as books and magazines), heavy
or lightweight originals, and transparencies. Also place originals on the glass plate when
you want to copy an A3 original with an image that extends all the way to the edges
without the periphery of the original being cut off.
Warning:
Do not press down hard on the ADF when you use the glass plate to copy thick books.
Doing so may damage the glass plate and result in personal injury.
Note:
The scanner automatically detects the following sizes of originals (after you closed the
ADF): A5, Statement 5.5"x8.5", B5, A4, A4R, Letter 8.5"x11", LetterR, B4R, B5R,
LegalR 8.5"x14", A3R, TabloidR 11"x17", B6.
How to copy or scan originals using the glass plate
Copy originals on the glass plate
#
Illustration
Action
Step
Sensor
Sensor = Sensor
Open the ADF.
Note:
Open the ADF at least 300
mm (11.8"). Otherwise, the
size of the originals may not
be detected correctly.
1
Place 1 original face down on the
glass plate.
2
Chapter 2 - Use the scanner
15
Copy or scan originals using the glass plate
Summary of Contents for Duplex Color Image Reader Unit-D1
