Oce Duplex Color Image Reader Unit-D1, User Manual

Page: 10 / 34

The main parts of the scanner
Introduction
Place your originals on the glass plate or into the automatic document feeder (ADF),
depending on the size and type of the original, and the copy modes that you want to use.
Both sides of 2-sided originals can be scanned simultaneously. The table below describes
the glass plate and the ADF.
Overview of the feeding possibilities
#
Function Component
Place the originals on the glass plate to copy bound
originals (such as books and magazines), heavy or
lightweight originals, and transparencies. Glass plate
Place the originals into the ADF when you want
to copy several originals at the same time. The
originals are automatically fed to the glass plate
and scanned. 2-sided originals can also be scanned
as 2-sided documents.
The ADF has a capacity of 300 sheets (80 g/m²
or 20 lb Bond). Automatic document feeder
(ADF)
Warning:
Do not insert your fingers into the gaps around the originals tray, because your fingers
may get caught.
Caution:
Be careful not to drop objects such as paper clips into the gaps because this can cause
damage to the machine.
Note:
If the original document consists of more than 300 sheets (based on 80 g/m² or 20 lb
Bond media), you must split the original document into smaller partial sets (subsets).
Then you must use the 'Combined copy job' function to scan the subsets individually
and create 1 document containing all the subsets.
Chapter 2 - Use the scanner 10
The main parts of the scanner