70
Technical data
Book cool-down time
The table below lists the recommended cool-down time for the glue in the book cover spines
to reach almost full strength. When the books exit the DFS10, you can handle and browse
through them. You should not, however, allow them to lie open until the recommended cool-
down time.
¹The times indicated are for stacks of books consisting of copy sets fed into the DFS10 from
the host machine. Individual books will cool down in approximately half the time shown.
Books consisting of cooled-down copy sets fed through the Manual Feeder will also cool
down in half the time shown.
Spine width
(millimeters/inches)
Cool-down times
(in minutes)¹
1,5 (1/16)
10
3 (1/8)
15
6 (1/4)
25
9 (3/8)
35
13 (1/2)
45
Summary of Contents for DFS10
