32
Making the books
5. Retrieve the bound books from the Output Tray of the
DFS10.
NOTE:
The entire binding process for each copy set takes
about two minutes from the time the copy set enters the
DFS10 until it is available as a bound book in the Output
Tray of the DFS10.
NOTE:
When the books exit the DFS10, you can handle
them and browse through them. You should not, however,
allow them to lie open until the glue in the cover spine has
cooled and reached full strength. The recommended cool-
down time depends on the width of the spine and the
number of books. Refer to the book cool-down table in
chapter 7, ”Technical data”.
Summary of Contents for DFS10
