Oce CS655 Pro, Administrator'S Manual

Page: 98 / 275

5 User setting
5-12 CS655 Pro
5.2.9 04 Reset Setting \ 02 Mode Reset Setting
The following features can be provided by switching the setting.
Change user
Select whether or not to initialize the settings currently specified when the machine takes it that the user has
changed.
This machine considers the following cases as user change (Change user):
- When the optional key counter or magnetic card of the data controller is removed.
- When [Access] is pressed after the User Authentication/ Account Track setting has one bee performed.
ADF original direction
Select whether or not to initialize the settings currently specified when the machine takes it that the original
document is loaded into the ADF.
Reset button function
When the machine is reset, select the copying conditions from the factory default setting (Full Auto), or Initial
Set which is set the desired copy condition.
For the Full Auto setting, the finisher mode can be changed to [Finisher Mode by Full-auto] as required.
Mode memory auto call
Specify the subsequent operation when selecting [Initial] for the Reset button function. Select [OFF] to reset
to the initial setting which has been specified by selecting [02 User Setting] > [02 Initial Setting] > [01 Copy
Initial setting], or [ON] to use the copy conditions written to Mode Memory 30 as the initial setting.
Finisher Mode by Full-auto
Specify the initial setting for the finisher when selecting [Full Auto] in the Reset button function.
Initial by Key Counter Insert
Select to reset or not when inserting the key counter or magnetic card of the data controller.
Status Hold When Auto Reset
When Reset functions select to reset the Original glass/ADF mode to the initial setting, or save the previous
setting.
Next Job Staple Setting
Staple mode is automatically canceled after a job is completed with Staple sort mode On.
Original Set/Bind Direction
Select to reset or save the original direction setting made on the Special Original Screen and the binding
position setting made on the Output Mode Screen after completion of each copying job.