Oce Colorado 1640, Operation Manual

Page: 8 / 194

About this guide
Introduction
The guide addresses the Océ Colorado 1640 and is written for the printer operator.
It describes
the complete workflow of the printer
: from setup to the operation, maintenance and
troubleshooting of the machine.
Process Actions Reference
Before using the sys‐
tem
Components of the printer
Explore the system on page 15
Daily use Use the RIP software Configure media in the RIP on
page 25
Load, wind, and cut media Handle the media on page 23
Print a job Print a job on page 89
Improve quality
Improve quality on page 137
Maintenance Clean and maintain the print-
heads
Maintain the printheads on page 94
Maintain the rest of the printer
Maintain the printer on page 108
Network and security
Network and security options
Configure the network and security
settings on page 153
Troubleshooting
Clear jams, stop the printer
General troubleshooting on
page 177
Clean polluted parts
Clean ink pollution on the printer on
page 185
Operator skill level
This guide describes safeguards for the protection of an instructed person. Instructed person is a
term applied to persons who have been instructed and trained by a skilled person, or who are
supervised by a skilled person, to identify energy sources that may cause pain and to take
precautions to avoid unintentional contact with or exposure to those energy sources.
About this guide
8 Chapter 1 - Introduction