manualshive.com logo in svg

Oce Arizona 640 GT, User Manual, Page: 145 / 230

Share
Download
Oce Arizona 640 GT User Manual Download Page 145

How to Create a Spot Channel Path in Illustrator

Conversely, you may place a raster file in your Illustrator document and create Spot data in
Illustrator using the path creation tools. Create your path using the data as your guide and once
the path is completed, fill this path with your Spot 1 or Spot 2 color. This filled path should be
placed above image in layers palette. In this particular case, the complexity of the selection path
may dictate it's creation in PhotoShop, and Illustrator may be better used for simpler objects.

Procedure

1.

First, select your clipping path and make a copy of it.

[108] Select Clipping

[109] Copied Path

2.

Then move the new layer outside of the group it is in to un-link it from the clipping path.

[110] Moved Channel

3.

Once outside the group, make sure path is selected and fill it with your Spot 1 or Spot 2 color.

4.

Once that is done, replace path in the group above the image and clipping layers. Ensure that
Overprint is turned on.

How to Create a Spot Channel Path in Illustrator

Chapter 9 - How to Work With White Ink and Varnish

145

Océ Arizona 600 Series

Summary of Contents for Arizona 640 GT







































































































































































































































Reviews:

No comments