Oce 9300, User Manual

Page: 40 / 121

40 Océ 9300 User Manual
Printing files
The Océ 9300 can be connected to a host environment, which may be either a
stand alone PC/Workstation or a PC/Workstation connected to a network. It
accepts various standard format CAD/CAM vector and EDMS raster data files
from the host environment and converts these into high quality plots (see
figure 19).
[19] Data flow to the Océ 9300
When an Océ 9300 receives vector (HP-GL, HP-GL/2, VDF, BGL, Calcomp
906/907), raster (HP-RTL, TIFF, CALS) or PostScript (PostScript level 2
optional) data, it generates a plot using the settings (e.g. number of copies,
plotter emulation, etc.) specified on the operator console in Program Mode.
For maximum flexibility, each plot job can be preceded by remote-control
commands specifying the settings to be used for that specific job. These
commands are contained in a 'header' containing job- and file-specific settings
(e.g. number of copies), in Remote Control Format (RCF), which override the
settings programmed in Program Mode.
Application
Software
Océ 9400
Pl RCF
Plot
Job
Settings
Plot
File
Océ 9300