1
1-2
Connecting to the Network
Stages of installation on the network
Installation can be performed by a network or printing administrator. The stages of a
successful installation are:
•
Physically connecting the Océ 760C to a functioning network
Prepare a network node for the Océ 760C—obtain cable, route it to the location
where the Océ 760C will be installed (near the copier), and attach the cable to the
network interface of the Océ 760C (for details, see
N
OTE
:
If you plan to run Command WorkStation software, you will need to install the
software and connect the Command WorkStation computer to the network along with
the Océ 760C. For more information, see the
User Software Installation Guide
•
Configuring the network server
When network servers are required, you need to configure those servers to provide
client access to the Océ 760C as a color PostScript printer. For information on
configuring network servers in Windows and UNIX network environments, see
•
Setting up the Océ 760C
Configure the Océ 760C for your particular printing and network environment.
First read
, and then see subsequent chapters for details.
•
Preparing client workstations for printing
Install the files needed for printing, install additional user software, and connect the
client to the Océ 760C over the network. These steps are described in the
, and some information is also provided in
.
•
Administering the Océ 760C
Monitor and maintain system performance and troubleshoot problems that arise.
For details, see
