OCCO S, Operator'S Manual, Page: 22 / 62

4. The live view window will get minimized, and you can now move that screen away to expose the
UI controls of OCCO, as well as the windows PC. Now you can connect to wireless, clean up
folders, etc, same way you would on a regular PC.
5. Once you are finished with whatever you wanted done – bring OCCO back to full screen mode.
To do so – move the cursor over the live view stream again and double tap the touch pad (or
double click the left bumper) on the wireless keyboard. OCCO will once again take up the whole
screen
Figure 11 Wireless Keyboard. Exact brand and model may be different for your OCCO kit
Stopping OCCO
It may be necessary sometimes to stop OCCO software, e.g. to perform maintenance tasks on the PC,
upgrade OCCO software, etc. To do so – exit the full screen mode as described in
Starting Up OCCO
section, move the live view screen away to expose the OCCO UI window, and click X to close the OCCO
UI. OCCO application will stop. To start it up again – click OCCO.exe icon the desktop of the PC.
In general, you do not need to turn off the TV when shutting down the system so the screen turns on
automatically when OCCO is plugged in. In any event, make sure to always carry the TV remote control
in order to be able to adjust the volume, as well as turn the screen on if needed.
Connecting to the Internet
If your OCCO came with the cellular connectivity option – you will have a special modem connected to
the USB hub of OCCO’s internal PC, which is located in the lower compartment of OCCO. This modem
will automatically connect to the internet upon startup if cellular signal is available at the location (OCCO