Packing OCCO
1.
Using wireless remote controller, double tap on the live view to exit the full screen mode.
2.
Close the OCCO Robot Controller application.
3.
From your windows desktop, click “Shutdown the machine” icon and wait until the system
fully shuts down.
4.
Unplug the robot from power source
5.
Open the transportation case, take
out the security belts such that they
are not in the way when you lay down
the machine.
6.
While holding the riser grip, remove the security
pin to allow the leg to collapse
7.
Slightly loosen the Riser Fixator Knob with one
hand, while firmly holding the riser handle with
another, be ready to hold the weight of the
machine. Gently lower the machine to its minimum
height.
8.
Tighten the Riser Fixator Knob to prevent the leg from extending when you lift the machine
off of the pedestal.
Figure 5 Transport case ready to load
Summary of Contents for S
