Occhio Sento letto, Mounting Instructions

Page: 32 / 54

04
Read through the mounting/use inst-
ructions carefully before installing the
luminaire. Follow the safety precau-
tions in these instructions closely and
keep the instructions in a safe place.
Explanation of symbols
This symbol warns you of a dan-
gerous situation which could lead
to serious injury or even death if
the instructions are not observed.
It also draws your attention to
possible material damage and pro-
vides other important information
in con-nection with this product.
This symbol warns you of hot surfaces,
which could cause burns if touched.
This symbol draws your attention to
situations in which you could look
directly into the light of the LED.
This may cause an after-image
effect and may result in damage
to the eyes if you look at the light
directly for prolonged periods.
General safety precautions
The assembly and installation of
electrical components must be car-
ried out only by qualified personnel.
Repairs must be carried out only by
authorised, qualified personnel or
the manufacturer. Before performing
any work on the spotlight (installati-
on, changing the light source, clea-
ning, etc.), it must be disconnected
from the mains supply.
0,2 m
Maintain the minimum safety
distance from flammable materials:
20 cm.
Caution: When used for prolonged
periods, the surface of the spotlight
can become hot.
Before performing any work on the
spotlight (fitting the spotlight, chan-
ging the light source or insert, etc.),
always switch the spotlight off and
let it cool for at least 30 minutes.
Safety precautions