- 8 -
Earphone Plug
For connecting earphone
Lanyard Loop
For connecting lanyard.
4.4 First Use
Please read this manual before using your OCB-GT-03i.
4.4.1 Ensure that your OCB-GT-03i has a working SIM
installed.
- Check that the SIM has not run out of credit (Test the SIM in a
phone to make sure it can send and receive SMS)
- Check that the SIM Lock code is turned off
- If you require the function of sending an SMS location report to
the authorized phone number when it makes a call to the OCB-
GT-03i, please make sure the SIM installed supports displaying
caller ID.
4.4.2 Charge the battery for at least 3 hours in power-off status
using the wall charger or car charger. Or you can connect the
tracker directly to computer by USB for charging. Red light is on
during charging and off when charging is complete.
4.4.3 Push the Power On/Off button to the ON side and wait for
about 20 seconds. It will then enter standby mode. It is suggested
that you be in an outer place where it can receive better GPS when
you turn on the device.
Check that the Red LED (Battery) is flashing 1 second on and 2
seconds off.
Check that the Green LED (GSM) is flashing 0.1 second on and 2.9
seconds off.
Check that the Blue LED (GPS) is flashing 0.1 second on and for
2.9 seconds off.
5. Change Password
Command
: W******,001,######
Description
: Change user’s password.
Note
:
1. ****** is user’s password and the default password is 000000. The tracker will only accept commands
from a user with the correct password. Commands with wrong password will be ignored.
2. ###### is the new password. Password should be 6 digits.
Example
:
W000000,001,123456
W123456,001,999999
All manuals and user guides at all-guides.com
