OCB OCB-GT-03i, User Manual

Page: 12 / 23

- 13 -
X=2, to enable GPRS tracking via UDP
Example : W000000,013,1
7.6.6 Set GPRS Interval
Command : W******,014,XXXXX
Description : Set time interval for sending GPRS packets.
Note :
XXXXX should be in five digits and in unit of 10 seconds.
XXXXX=00000, to turn off this function;
XXXXX=00001~65535, time interval for sending GPRS packet and in unit of 10 seconds.
In this example, the tracker will send every 600 seconds (10 minutes).
Example : W000000,014,00060
The tracker will send every 600 seconds (10 minutes).
For more information regarding GPRS tracking please refer to <GPRS Communication Protocol>
7.7 Track by GpsGate
The OCB-GT-03i supports GpsGate Software.
Please contact us or GpsGate for more information of settings.
8. Authorization
Command : W******,003,F,P,T1 or W******,003,F,P,T1,T2 (optional)
Description : Authorize phone numbers for the buttons/inputs for receiving location reports or SMS alarms
or phone calls
Note :
F=0, to turn off this function; (default)
F=1, only send SMS to the authorized phone number;
F=2, only call the authorized phone number;
F=3, both SMS and calling
P=1, set an authorized number for SOS button (Input 1)
P=2, set an authorized number for B button (Input 2)
P=3, set an authorized number for C button (Input 3)
T1: Preset phone number. Max.16 digits
If you need to set different numbers for receiving SMS and phone call, you can then use
W******,003,F,P,T1,T2, In this case T1 is the phone number for receiving SMS and T2 for receiving phone
call.
Example :
W000000,003,3,1,88888888
W000000,003,3,1,88888888,99999999
All manuals and user guides at all-guides.com