OCB OCB-GT-03i, User Manual

Page: 23 / 23

- 24 -
seconds off)
GSM Network is slow Some GSM networks slow down during peak time or when they have
equipment problems.
Unit is sleeping or in power down mode Cancel sleeping mode or power down
Wrong password in your SMS or wrong SMS
format
Write correct password or SMS format
The SIM in OCB-GT-03i has run out of credit Replace or top up the SIM card
Problem: Green LED is Flashing (1 second on and 2 seconds off)
Possible Cause: Resolution:
No GSM signal Check with a mobile phone to see if there is a signal in the area or try to call
the unit to see if you hear a ring tone.
No SIM card Insert a working SIM card. Check in phone that the SIM can send SMS
message.
SIM card has expired Check in phone that the SIM can send SMS message. Replace SIM card if
needed.
SIM has PIN code set Remove PIN code by inserting SIM in you phone and deleting the code.
SIM is warped or damaged Inspect SIM, clean the contacts. If re-inserting does not help try another to
see if it will work.
Roaming not enabled If you are in a different country your SIM account must have roaming
enabled.
Battery is low Recharge the unit and the GSM will start working.
Problem: Blue LED is Flashing (1 second on and 2 seconds off) or the SMS received starts with ‘Last…’
Possible Cause: Resolution:
Unit does not have clear view of the sky Move the unit to a location where the sky is visible. Tall buildings, trees,
heavy rain, can cause problems with the GPS reception.
Bad GPS reception Place the front side of OCB-GT-03i towards sky
Battery is low Recharge the unit and the GPS will start working.
Problem: Unit Fails to Connect to Server via GPRS
Possible Cause:
Resolution:
SIM card in OCB-GT-03i does not support GPRS
function
Enable SIM card GPRS function.
GPRS function of OCB-GT-03i is turned off Turn on GPRS function of OCB-GT-03i.
Incorrect IP address or PORT Get the right IP address and PORT and reset to OCB-GT-03i.
GSM signal is weak Move the unit to a location with good GSM reception.
Contacts
If you encounter any problems when using our products, and cannot solve them by yourself, please contact
our technical support team by writing an E-Mail to
info@nodactechnology.com . We will be pleased to help
you.
All manuals and user guides at all-guides.com