OCB OCB-DVR700, User Instruction Manual

Page: 16 / 53

15
Fig. 6
1.5U model PTZ linkage should be as follows:
Fig. 7
Each camera press shown connection is completed, go to the Main Menu — PTZ Setup — PTZ menu, select
Connect head's port number, and you can set the camera's head address, baud rate and head a protocol parameters.
2UCaseD1model and 2UCaseCIFmodel need to choose the port number
（
RS485(1) or RS485(2)
）。
WARNING: PLEASE SET ALL OF THE PTZ ADDRESSES DIFFERENTLY.
After the setup, click “ PTZ ” on the shortc ut menu to enter the PTZ control interface.