Obvius AcquiSuite Ally, User Manual

Page: 50 / 63

AcquiSuite Ally 12 & 48 User Guide (Rev D)
50 | P a g e
C
ONFIGURING
E
LEMENT AND
C
HANNEL
R
EGISTER FOR
S
ERVICE
T
YPES
The Obvius Ally Configuration Console software enforces all element configurations to form a valid
electrical system. Configurations performed by remote systems may produce unexpected results if
configurations are internally inconsistent. The following tables document how to configure element and
channel registers for each service type. Every register should be explicitly written.
Red Text indicates Required Values, Purple Text i ndicates Suggested Defaults if this data is not known.
Modbus Absolute Address/BACnet Object Assignments for Setting up Service Types
REGISTER TEMPLATE
Service Type 2207
V_Input 2217
Description 2617
Channels Volt Ref CT Type Range Phase Shift CT Multiplier CT Sign
CH1 2220 2223 2224,2225 2224,2225 2221,2222 2226
CH2 2229 2232 2227,2228 2233,2234 2230,2231 2235
CH3 2238 2241 2236,2237 2242,2243 2239,2240 2244
Configurations
4 Wire 3 ɸ (Wye)
Service Type 1
V_Input 1 or 2
Description 31 Char
Channels Volt Ref CT Type Range Phase Shift CT Multiplier CT Sign
CH1 L1 – N [1] mV [1] or RōCoil [2] Any > 0A -3.0 ˚ to +3.0 ˚ Any > 0 [1] 0 or 1
CH2 L2 – N [2] mV [1] or RōCoil [2] Any > 0A -3.0 ˚ to +3.0 ˚ Any > 0 [1] 0 or 1
CH3 L3 – N [3] mV [1] or RōCoil [2] Any > 0A -3.0 ˚ to +3.0 ˚ Any > 0 [1] 0 or 1
3 Wire 3 ɸ (Delta)
Service Type 2
V_Input 1 or 2
Description 31 Char
Channels Volt Ref CT Type Range Phase Shift CT Multiplier CT Sign
CH1 L1 – N [1] mV [1] or RōCoil [2] Any > 0A -3.0 ˚ to +3.0 ˚ Any > 0 [1] 0 or 1
CH2 L2 – N [2] mV [1] or RōCoil [2] Same as 1 Same as 1 Same as 1 0 or 1
CH3 L3 – N [3] mV [1] or RōCoil [2] Same as 1 Same as 1 Same as 1 0 or 1
Even though CH2 is calculated internally it is recommended that the CT settings reflect those from CH1 rather than being left at factory default
to facilitate configuration validation from the RTU.