25
FIRMWARE UPDATES
Updates for improved performance or to add additional features may be available on
www.obsidiancontrol.com.
To install a firmware upgrade, connect to the device through a web browser and open the System –
Maintenance menu.
Always back up the configuration first. Export to a file using the web interface.
• Upload the firmware file, then update the device. Do not power cycle during the update process.
The update is provided in two files, Display NFW and Web IMG. Both need to be installed for a full upgrade.
• Reset to factory defaults.
• Reload the configuration file from the web interface.
Confirm the upgrade is installed from the Information/Software Version Display.
If the system menu is corrupt and or cannot be opened, then the Netron device can be updated from
an IP address e.g. 2.26.206.242/update.html.
Each device has a unique Device IP Address; of which the one shown is only an example.
Each device has a unique Device IP Address, of
which the one shown below is only an example.
Summary of Contents for NETRON EP2
