85
NVR4020, NVR8040 Embedded NVR User Manual
2. Click the
More Settings
tab to open the
More Settings
menu.
3. Set the Multicast IP address. When adding a device to the Network Video Surveillance Software, the multicast address must be
the same as the NVR’s multicast IP.
4. Click
Apply
to save your settings and close the menu.
NOTE
The multicast function must be supported by the network switch to which the NVR is connected.
7.2.7 Configuring RTSP
The RTSP (Real Time Streaming Protocol) is a network control protocol designed for use in communication systems to control
streaming media servers.
1. Open the Network Settings menu. Go to
Menu | Configuration | Network
2. Click the
More Settings
tab to open the
More Settings
menu.
3. In the menu shown above, enter the RTSP port number. The default RTSP port is 554.
4. Click
Apply
to save your settings and close the menu.
SECTION 7: NETWORK SETTINGS
Summary of Contents for NVR4020
Page 8: ...viii NOTES...
