Observint HDV-SYSNB2WFL, User Manual

Page: 57 / 68

57
Chapter 7 Remote Access via Web Client
Use the Web Client to remotely access your Wire-Free NVR with a PC. Before you access the Web
Client, ensure that the network settings of the Wire-Free NVR are configured properly.
The most convenient and easiest way is to configure the NVR with a static IP address (see “ 5.4.1
Network ”). With a static IP address, you can access the NVR with a web browser on your PC by
entering the static IP address in the URL field of a browser. If the IP address of the NVR is assigned
by a DHCP server (see“
5.4.1 Network ”), the IP address may change on a regular basis. In this case,
always check the NVR for its current IP address.
System Environment Requirements
The minimum requirements for hardware and OS required to run Web Client are given as below.
7.1
Web Plugin Download and Installation
To access the Web Client, do the following:
For IE/Chrome/Firefox:
1. Open the internet browser on your PC and then enter the IP address of the NVR in the URL
field.
Item Minimum Recommended
CPU Intel i3 Intel i7 or higher
RAM 4G or more 8G or more
Hard Drive 500G or more 1000G or more
Display RAM 2G or more 4G or more
Display Resolution 1280*1024 1920*1080
OS
Windows® Vista, Windows® 7 ,Windows® 8
Mac OS X® 10.9 and above
DirectX DirectX 11
Direct3D Acceleration Function
Ethernet Adapter 10/100M Ethernet Adapter
IE Microsoft Internet Explorer (Ver. 11,10,9,8)
Mozilla Firefox 43.0.4 or above
Google Chrome V44 or below
Mac Safari 5.1 or above