27
Channel:
Display channel number.
Switch:
Disable this feature or enable
PIR and Motion
Buzzer:
The NVR can use its internal buzzer to emit an alarm tone. You can set the buzzer duration
in seconds to sound when motion is detected.
Area:
Click the
Setup
icon to open the setup page.
Sensitivity
: Set the sensitivity level to 1 (low) up to 8 (high).
Distance:
Set detection distance of the PIR. The default is 80%.
Send Email
: Select this option for the NVR to send an email notification when motion is detected.
Picture to Cloud:
Upload the alarm picture to cloud storage after the alarm is triggered.
Video to Cloud:
Upload the alarm video to cloud storage after the alarm is triggered
。
Motion Detection Area:
Initially, the entire screen is marked for
motion detection (red blocks). To disable
the motion detection in a certain area,
click and drag the mouse cursor across
the area of the grid to highlight to
unmark the area. After setting is
completed, click the right button of your
mouse to return and then click
Apply
to
save your settings.
Summary of Contents for HDV-SYSNB2WF4
Page 2: ...2 ...
Page 10: ...10 2 Click OK to send email The following message should appear ...
Page 56: ...56 ...
