3
2 MP Full HD C-Mount Box Camera User Manual
SECTION 1: INTRODUCTION
NOTES:
•
Power indicator
- LED lights when the power is applied to the camera.
•
External Device Connectors:
—
D&N - To set the D&N (day and night) function manually, connect the external switch to set the D&N terminals. Open
the switch for day mode, close the switch for night mode.
Closed
(night node)
External switch
Open (day mode)
If you use the external D&N function, set the DAY/NIGHT option to EXT on the setup menu. See “3.3 EXPOSURE” on
page 9 for more information.
—
Alarm Output Terminal (ALARM OUT/COM) - Connect to the alarm input of an external device. When motion is
detected, 3.3 Vdc is applied to the Alarm Out - Gnd terminals.
—
RS-485 Communication - Connect to an external RS-485 controller.
•
HD-SDI
- Connect this connector to a device such as a DVR or monitor with a HD Video function.
•
Video output connector
(BNC type) - Connect this connector to a device such as a DVR or monitor with a VIDEO IN
connector.
•
Power input terminal
: 12 Vdc input terminals. Observe the polarity indicated when connecting 12 Vdc power to the
camera.
1.2 What you need
To install the camera you will need:
•
C- or CS-type lens
•
12 Vdc 1 A power source
•
Mounting bracket
•
Tools for mounting the camera
Summary of Contents for Black BLK-HDC10
Page 6: ...vi...
