5
www.Observint.com
8.
Turn the chassis over, and then attach the HDD power cable and SATA cable to the mating connectors on the HDD and PC board. These
connectors must be fully seated.
9.
Reinstall the NVR cover using the cover using the screws removed earlier.
10. During the NVR initialization, follow the options in the Wizard to initialize/reformat the HDD. You can also initialize the HDD using
the
Menu | HDD
feature. For more information, refer to the
ALIBI Embedded Network Video Recorder Firmware User Manual
available at
www.alibisecurity.com/resources
.
11. Initialize (
Init
) the HDD when you setup the NVR using Wizard.
7.
While holding the HDD in place in the chassis, turn the chassis over, and then ensure that the mounting screws are fully seated in the
mounting screw slots as shown in the photo below. Tighten the HDD mounting screws until snug. Be careful to not over-tighten the
screws.
© 2018 Observint Technologies. All rights reserved.
