— 7 —
Section Header
BEFORE MOUNTING THE CAMERAS in
their final location, plug them into a power
source near the monitor to verify pairing
and live viewing is successful.
The power LED will illuminate RED to
indicate they are already paired and a live
view from each will AUTOMATICALLY
APPEAR on the monitor.
Plan where camera will be positioned. Make
sure there is an electric outlet near by in
order to connect power cable (up to
3.6M.
including extension cord) from the camera.
Screw the antennas clockwise into the back of
each camera and put into the upright position.
Secure the camera to
a stable surface, ceiling
or wall using the screws
included. See screw
hole template provided.
Adjust camera in an upright position
relative to your viewing environment.
Screw the antenna to the camera.
Locate a suitable location to mount the camera
Secure the camera stand to a stable surface,
ceiling or wall using four screws.
Make sure the camera is in an upright position
(relative to your viewing environment).
A
B
C
D
CAMERA INSTALLATION
Camera Mounting
Angle
Adjustments
Antenna Connector
(rear of camera)
Summary of Contents for SecuFirst CWL401S2
Page 38: ...www secu rst eu...
