6.2.10 Right Indicator Button and LED
This button activates and de-activates the wheelchair’s right indicator. Depress
the button to turn the indicator on and depress the button again to turn it off.
When activated the right indicator LED will flash in sync with the wheelchair’s
indicator(s).
6.2.11 External On/Off Switch Jack
This allows the user to turn the control system on and off using an external
device, such as a buddy button.
6.2.12 External Profile Switch Jack
This allows the user to select Profiles using an external device, such as a
buddy button.
To change the Profile whilst driving simply press the button.
If the control system is set to latched drive or actuator control operation, then
the polarity of the jack input is reversed to effect a fail safe system; meaning
this input will provide an External Profile Switch function and an Emergency
Stop Switch function.
The Joystick Module is supplied with rubber bungs that must be
inserted into the Jack Socket when no external device is connected.
6.3 LCD Screen
The status of the control system can be understood by observing the LCD
screen. The control system is on when the screen is backlit.
Refer to section 5 for details on screen symbols.
6.4 Charger Socket
This socket should only be used for charging or locking the wheelchair. Do not
connect any type of programming cable into this socket.
Refer to section 13 for more details on charging.
This socket should not be used as a power supply for any other electrical
device. Connection of other electrical devices may damage the control system
www.observer-mobilityproduct.com
12
