10
Getting Ready to Drive
Operate the On/Off switch. The screen will go through an initializing process
then show the base screen as follows.
In the case on an LED Joystick Module the battery gauge will illuminate.
Check that the Speed Setting is at a level that suits you.
Push the joystick to control the speed and direction of the wheelchair.
If you push the joystick before or just after you switch the control system
on, the screen will flash the joystick displaced screen. You must release
and center the joystick to resume normal operation. If you do not release
the joystick within five seconds the wheelchair will not be able to move,
even if you release the joystick and push it again. The screen will display
the diagnostic screen at this time. You can reset this condition by
switching the control system off and on again.
www.observer-mobilityproduct.com
19
