45 | EN
Mounting instructions, PYROLINE
®
BSK fire protection duct
Mounting the PYROLINE® Con S BSK with a support system
7. Place the duct cover on the duct trough so that the joint overlap is
located on the following duct trough.
8 6 1
Mounting a vertical bend on a bracket or support rail
With a vertical duct route, the fire protection duct must additionally be
mounted on the brackets or support rails with the GMS connection
bracket.
1
4
3
2
Abb 37:
Mounting on brackets or profile rail with vertical bend
1. Mount the GMS connection bracket
1
with an M6 truss-head bolt
2
and corresponding large washer
3
on the bracket or profile rail.
Note!
In the case of mounting on support rails, the bracket must be
fastened with an M10 hexagonal bolt and a corresponding large wash-
er.
2. Lay the fire protection duct on the GMS connection bracket and fix
with two screws of type KRS 6x30
4
.
8 7
Mounting separating retainers
If cables with different functions or voltages are routed in the PYRO-
LINE
®
Con S BSK fire protection duct, they must be separated by sepa-
rating retainers to avoid malfunctions or interference.
