EN | 17
EÜK mounting instructions
Mounting the underfloor duct
Fig. 11:
Cutting the underfloor duct
3. Adjust the underfloor duct
2
to the required length.
4. Deburr the edges of the underfloor duct
2
at the cut surfaces.
Fig. 12:
0° ±7°
Mounting the underfloor duct
Note!
Directional corrections from the underfloor junction boxes/underfloor
device sockets can be made up to a deviation of 7° without any impact.
5. Push the underfloor duct
2
as far as it will go into the underfloor
junction box/underfloor device socket
1
.
