EN | 11
EÜK mounting instructions
Preparations for mounting
phase, do not stand on the underfloor junction boxes/underfloor device
sockets, otherwise the duct system will not function. The damaged un-
derfloor junction boxes/underfloor device sockets must be replaced.
1. Create a clean, even raw floor as the basis for the screed-covered
duct system.
Fig. 5:
Preparations for mounting
2. Mark the planned cable routes and intersection points of the under-
floor junction boxes/underfloor device sockets
1
using a suitable tool
(e.g. laser measurement device or chalk line) on the floor.
