File: UT-5601
Copyright © - OBL Metering pumps - All rights reserved
8
6
TECHNICAL SUPPORT - INFORMATION
This product is guaranteed as stated in the general terms and conditions of sale. Should
malfunctions or failures (included within the cases covered by the warranty) be detected during the
warranty period, the Manufacturer will repair or replace the defective parts, prior to
verification.SAFETY
2
SAFETY
1
GENERAL SAFETY WARNINGS
The Manufacturer has designed this product to make it as SAFE as possible.
Every OBL KIT PRO is a reliable, quality product, which undergoes careful end inspection to ensure
proper operation and ascertain compliance with specified performance.
The Manufacturer of the machine must install the product and comply with all the regulations and
safety standards in force in the country of installation.
Attention! When using mains-powered equipment, always follow basic safety precautions, including
the following, to reduce damage to people and property:
Carefully read the instructions in this manual before installing/using the device.
Keep these instructions for future use.
2
USE RESTRICTIONS
The PRO KIT can be installed only and exclusively on the following pump models:
1.
OBL’s metering pumps of the Black Line series (M diaphragm version)
2.
OBL’s metering pumps of the Black Line series (R piston version)
3.
OBL’s metering pumps of the Black L
ine series (XRN version)
3
ELECTROMAGNETIC COMPATIBILITY
The user is the only responsible for solving problems related to electromagnetic compatibility once
the finished product is completely produced. In some cases, the equipment needs to be earthed
correctly, while in others a screen may be required. The manufacturer of the KIT PRO is available
to help the user solve problems related to electromagnetic compatibility upon request.
