background image

3

English

 

14. Always plug heaters directly into a wall outlet/receptacle. Never use with an 

extension cord or relocatable power tap (outlet/power strip). 

 

15. This appliance has a polarized plug (one blade is wider than the other). 

To reduce the risk of shock, this plug is intended to fit only one way in a 
polarized outlet. If the plug does not fit securely in the outlet, reverse the 
plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to 
defeat this safety feature. 

 

16. SAVE THESE INSTRUCTIONS

 WARNING

In order to avoid any electrical shock, short-circuit, burns, or cause a fire:

Do not disassemble. This product may only be disassembled by qualified repair technicians. To 

• 

request repair, see Warranty Page at the back of this manual.

Do not use if the power cord or plug is damaged, or if the plug is not fully inserted into the 

• 

outlet.

Do not scratch, damage, modify, forcibly bend, pull, twist, bind/clamp, or place heavy objects on 

• 

the power cord.

Do not allow children to use this product by themselves, and keep product and power cords out 

• 

of the reach of small children.

Use only with the designated power supply 110 – 120 V.

• 

Do not leave items like spray cans near the heater.

Do not use while clothing or a blanket is hanging on the heater.

Do not use while in bed.

If you notice anything unusual during operation (burning smell, 
smoke, etc.), immediately stop use, and unplug the power cord.

Insert the power plug all the way into the outlet.

Use a wall outlet rated at 15A or greater, with no other devices 
plugged in.

Wipe off any dust adhering to the power plug blades and plug 
surface.

If any liquid leaks from the battery of the remote control and gets in 
your eyes, do not rub them; rinse them out with water and see a 
doctor.

00̲MOD-PH1401US.indb   3

00̲MOD-PH1401US.indb   3

2014/11/27   21:25:02

2014/11/27   21:25:02

Summary of Contents for T3

















Reviews: